Our top seller products
100+ in stock
13 x in stock
29 x in stock
20 x in stock
100+ in stock
No results were found for the filter!
Variant available
Clamping force meter for checking the clamping force at three-jaw chucks, easuring range: 0.6 kN - 400 kN (varantion dependent).
From €1,692.30
*
Delivery time appox. 28 Workdays
2 x in stock
Clamping bolt L50-150 js6, with defined zero point, precise and powerful clamping of almost any workpiece shape, also suitable as clamping base.
From €140.30
*
approx. 1-3 workdays
3 x in stock
Workpiece stop milling D 5, is for use on drilling and milling machines, adjustable in five axes, with T-slots 12 and 14 mm with thread M8.
€133.16
*
approx. 1-3 workdays
4 x in stock
Ejector DIN 317, MK 0 - MK 6 for tool cones DIN 228, ejector wedge made of special steel, hardened and tempered in a burnished tone.
From €3.09
*
approx. 1-3 workdays
61 x in stock
Half automatic ejector DIN 318 / MK 1-3 and MK 4-6, for tool taper DIN 228, fast and safe operation with finger protection.
From €34.87
*
approx. 1-3 workdays
100+ in stock
Slot sealing for pressure collets according to DIN 6343, as replacement rubbers for sealing the slots on collets.
From €1.67
*
approx. 1-3 workdays
100+ in stock
Spacing collars DIN 2084 form A are used for shell mill holders for exact maintenance of the clearances for side milling cutter sets.
From €1.43
*
approx. 1-3 workdays
2 x in stock
Spacing collar set DIN 2084, form A/B consists of 35-60 rings for exact maintenance of the clearances for combination shell mill adaptors.
From €105.20
*
approx. 1-3 workdays
8 x in stock
Spacing collars DIN 2084 form B turned, hardened, plane-parallel ground and lapped, are used for combination shell mill adaptor.
From €4.52
*
approx. 1-3 workdays
71 x in stock
Hint!
Cone wiper MK size MK 1 - MK 6 for cleaning the inner cones, preventing damage and extending the service life.
From €6.55
*
approx. 1-3 workdays
34 x in stock
Hint!
Taper cleaner SK size SK30 - SK60 for cleaning the inner cones of machines, presetting devices and sleeves to extend the service life.
From €10.23
*
approx. 1-3 workdays
Variant available
Hint!
Cone wiper for collets ER 11 - ER 40 made of wood, to prevent damage / to extend service life, by cleaning the inner taper.
From €14.64
*
approx. 10 weeks
9 x in stock
Hint!
Cone wiper for collets OZ 6 - OZ 32 made of wood, for cleaning the inner cones, to prevent damage / to extend the service life.
From €21.54
*
approx. 1-3 workdays
29 x in stock
Hint!
HSK taper cleaner for size HSK 32 - HSK 100 to prevent damage and extend the service life, by cleaning the inner cones.
From €35.94
*
approx. 1-3 workdays
Subsequent delivery
Workpiece stop milling AMS160BH made of anodised aluminium, with 2 joint cups and head, 360° rotatable, including sliding blocks.
€136.14
*
approx. 10 weeks
10 x in stock
Removable tangs for morse taper with thread M6-20 for screwing into Morse taper shanks MK 1-5 according to DIN 228A.
From €9.40
*
approx. 1-3 workdays
29 x in stock
Clutch drive ring DIN 6366 for combi shell end mill holders with transverse groove, flat surfaces ground parallel.
From €9.88
*
approx. 1-3 workdays
45 x in stock
Sealing disc for clamping nut ISO 15488 (DIN 6499) for tools with high-pressure cooling up to 1160 psi (max. 80 bar).
From €19.64
*
approx. 1-3 workdays
17 x in stock
Aluminium case for collets, suitable for ER16-40 and 410E-467E, as milling machine accessories for insertion and safe storage in one place.
From €18.09
*
approx. 1-3 workdays
100+ in stock
Clamping nut ER DIN ISO 15488 prev. DIN 6499 with right-hand thread with 6 grooves, one-piece, is case hardened and burnished.
From €9.64
*
approx. 1-3 workdays
13 x in stock
Clamping nut for collet chuck OZ DIN 6388 (DIN ISO 10897) in one-piece or roller-bearing design with 6 grooves, case-hardened and burnished.
From €27.61
*
approx. 1-3 workdays
47 x in stock
Tool mounting block Universal, horizontal-vertical SK / BT 30, 40, 50, made of aluminium to protect the tools, with clamping surface for clamping.
From €101.39
*
approx. 1-3 workdays
11 x in stock
Drive key for face mill holder with enlarged contact face, for arbor-Ø 16 / 22 / 27 / 32 / 40 mm, including screw DIN 912.
From €4.28
*
approx. 1-3 workdays
68 x in stock
Feather key for combination end mill adaptors, with push-off screw DIN 913, variants: 4 x 4 x 20 | 6 x 6 x 25 | 7 x 7 x 25 | 8 x 7 x 28 | 10 x 8 x 32 mm.
€2.98
*
approx. 1-3 workdays
100+ in stock
Safety-spanner for ER Mini collet chuck, collet wrench for collet with mini nut hardened and galvanized.
From €10.12
*
approx. 1-3 workdays
100+ in stock
Safety spanners for collets type ER for clamping nuts DIN 6499 / ISO 15488-D with six grooves (form E)
From €9.88
*
approx. 1-3 workdays
20 x in stock
Spanners for cross screws DIN 6368, for combination shell mill adaptors or combi-end mill arbors as milling machine accessories.
From €10.71
*
approx. 1-3 workdays
11 x in stock
Hook wrench DIN 1810A with nose, especially for clamping nuts OZ, made of special steel, hardened and tempered in burnished tone.
From €9.88
*
approx. 1-3 workdays
8 x in stock
Ortlieb Clamping nut for Rubber-Flex® RFCJ Collets, with sliding ring, as accessories or replacement for drill holders.
From €47.96
*
approx. 1-3 workdays
1 x in stock
Clamping nut for sealing discs ISO 15488 (DIN 6499) hardened, use your regular collet for internal cooling.
From €42.13
*
approx. 1-3 workdays
2 x in stock
Mounting block made of aluminium, with clamping face, for SK / BT 30, 40, 50, tools according to DIN 2080, DIN 69871, MAS 403 BT (JIS B 6339).
From €86.30
*
approx. 1-3 workdays
1 x in stock
Cross retaining screws DIN 6367 as milling machine accessories for shell end mill holder.
From €5.12
*
approx. 10 weeks
7 x in stock
Workpiece stop milling TYPE WAM with two permanent magnets (Sm-Co) and large adjustment range as material stop suitable for all vices.
€102.82
*
approx. 1-3 workdays
100+ in stock
Clamping screw for Weldon chucks, DIN 1835B as spare part for the end mill holders with clamping diameter 6 - 40 mm.
From €1.31
*
approx. 1-3 workdays
100+ in stock
Pull studs MAS BT 45°, with or without bore, SK40 - M16, SK50 - M24, pull studs for steep taper tool holders BT, precisely ground and burnished.
From €6.19
*
approx. 1-3 workdays
14 x in stock
Pull studs MAS BT 60, SK40 / SK50 with or without bore, for steep taper tool holder BT as milling machine accessories.
From €6.19
*
approx. 1-3 workdays
6 x in stock
Pull studs 90° according to ISO 7388-3 (MAS BT) SK40 / SK50 without bore, for steep taper tool holder BT, precisely ground and burnished
From €6.19
*
approx. 1-3 workdays
100+ in stock
Pull studs DIN 2080 OTT, SK40 - M16, SK50 - M24, with internal thread or without bore, for tools with steep taper as milling machine accessories.
From €8.09
*
approx. 1-3 workdays
87 x in stock
Pull studs DIN 69872, SK30 / SK40 / SK50 with or without bore, for tools with steep taper DIN 69871, precisely ground and burnished
From €6.90
*
approx. 1-3 workdays
100+ in stock
Pull studs ISO 7388 II B, SK40 - M16, SK50 - M24, with or without bore, for steep taper tool holders, precisely ground and burnished.
From €10.35
*
approx. 1-3 workdays
50 x in stock
Pull studs DECKEL S20x2, SK40, asymmetrical thread are for tools with steep taper SK40 as milling machine accessories.
€12.97
*
approx. 1-3 workdays
9 x in stock
Security socket wrenches for pull studs for safe tightening, no slipping as with conventional spanners, reduced risk of accidents.
From €32.61
*
approx. 1-3 workdays
Variant available
Clamping force meter for checking the clamping force on vices and clamps, measuring range: 0.6 kN - 100 kN (varantion dependent).
From €1,142.88
*
Delivery time appox. 7 Workdays
Variant available
Tigthening force meters for checking the force on spindles, delivered in wooden case with calibration certificate.
From €1,653.27
*
Delivery time appox. 14 Workdays
100+ in stock
Coolant tube HSK-A for tool holders DIN 69893 as coolant transfer units for the coolant supply through the centre of HSK tool holders.
From €6.78
*
approx. 1-3 workdays
51 x in stock
Key for coolant tubes as milling machine accessories for mounting the coolant tubes in HSK toolholders DIN 69893 form A.
From €13.09
*
approx. 1-3 workdays
Variant available
Rotori jaw turning rings for lathe chucks up to 1200 mm, patented, precise boring or grinding of chuck jaws by infinitely variable adjustment.
From €844.90
*
approx. 10 weeks
Subsequent delivery
Tool assembly aid SK 40 made of polyamide for gentle pick-up, easy to set up and take down with magnets for horizontal tool mounting.
€107.04
*
approx. 10 weeks
