Our top seller products
10 x in stock
100+ in stock
1 x in stock
Variant available
38 x in stock
No results were found for the filter!
25 x in stock
Knife edge tools set, 5 pieces, in case, consisting of INOX hairpin DIN 875/00, carving angle, hair ruler and scribing tip.
€120.31
*
approx. 1-3 workdays
100+ in stock
Precision marking caliper with fine adjustment, type C017, made of special steel, hardened, satin chrome finished, nonius 0.05 mm, in case.
From €99.60
*
approx. 1-3 workdays
14 x in stock
Compass vernier caliper with nonius and scale satin chrome finished, made of special steel, hardened, with or without carbide points
From €62.71
*
approx. 1-3 workdays
100+ in stock
Divider with joint din 6486 as marking tool is forged steel with angular legs and hardened tips.
From €10.12
*
approx. 1-3 workdays
100+ in stock
Wing divider with joint DIN 6486 as marking tool is forged steel with angular legs and hardened tips.
From €9.28
*
approx. 1-3 workdays
100+ in stock
Bow compass pencil compass DIN 6484 with rivet hinge and adjustable bow is forged from steel and is finely polished.
From €12.73
*
approx. 1-3 workdays
100+ in stock
Inside calipers with rivet joint DIN 6482, type 3, length 150 - 1000 mm, made of forged steel, fine polished for taking and transferring measurements.
From €7.14
*
approx. 1-3 workdays
100+ in stock
Outside calipers with rivet joint DIN 6484, type 4, length 150 - 1000 mm, made of forged steel, fine polished for taking and transferring forms and measurements.
From €7.14
*
approx. 1-3 workdays
100+ in stock
Outside and inside calipers combination, type 20, total length 150 | 200 | 250 | 300 mm, as inside and outside divider caliper.
From €14.40
*
approx. 1-3 workdays
100+ in stock
Precision spring compass DIN 6487 with hardened tips and quick-release nut as scribing tool for small distances on technical surfaces.
From €8.33
*
approx. 1-3 workdays
26 x in stock
Precision spring outside calipers DIN 6487, type 18, length 75 - 600 mm, with square legs and quick nut, with hardened points
From €8.93
*
approx. 1-3 workdays
11 x in stock
Precision spring inside calipers DIN 6487, type 19, length 75 - 600 mm, with square legs and quick nut, with hardened points
From €8.93
*
approx. 1-3 workdays
50 x in stock
Precision spring compass DIN 6487 with interchangeable tips, quick-release nut as marking tool for small distances on technical surfaces.
From €8.93
*
approx. 1-3 workdays
100+ in stock
Scriber in basic version, with 1 hardened steel points straight | with hardened steel points straight and bent 90° or with carbide points.
From €2.38
*
approx. 1-3 workdays
100+ in stock
Carbide-tipped scriber in pencil form with clip, type 39/1, length 150 mm solid metal, with exchangeable hard metal point.
€10.12
*
approx. 1-3 workdays
100+ in stock
Scriber with fixed carbide point and clip, holder is nickel-plated, optionally with hard metal point length 5 | 15 mm.
€3.93
*
approx. 1-3 workdays
100+ in stock
Heavy duty carbide scriber, type 38, sturdy plastic handle for a secure grip when scribing for powerful markings.
€9.28
*
approx. 1-3 workdays
12 x in stock
Steel beam compass, Inox satin chromed, with fine adjustment, made of INOX steel hardened, exchangeable HM points, nonius and scale satin chrome finished.
From €116.14
*
approx. 1-3 workdays
4 x in stock
Steel beam compass with round rod and exchangeable hardened points, range 500 | 1000 | 1500 | 2000 | 3000 mm, fine adjustment and nonius 1/10 mm
From €165.89
*
approx. 1-3 workdays
Variant available
Steel beam compass with fine adjustment by friction wheel, with flat rod, with exchangeable steel points, reading 1/10 mm.
From €141.02
*
approx. 10 weeks
10 x in stock
Precision internal and external caliper, hardened black aluminium (HRC63) type 25/A, L= 200 | 260 | 325 | 415 | 490 mm, with precision scale,
From €68.90
*
approx. 1-3 workdays
15 x in stock
Steel marking gauge with round rod and round plate 55 mm as scribing tool with 1/10 mm reading and hardened steel point.
From €46.05
*
approx. 1-3 workdays
1 x in stock
Steel marking gauge type 298, made of stainless steel, flat design, scale matt chrome-plated, hardened marking edge as marking tool with mm-scale.
From €21.06
*
approx. 1-3 workdays
38 x in stock
Steel gauge with round rod and square plate as scribing tool with measuring range of 300 mm at 1/10 mm graduation.
€50.22
*
approx. 1-3 workdays
100+ in stock
Marking vernier caliper with roll, range 200 | 400 mm, stainless steel, chrome finished, nonius 1/20 mm or 1/28 inch, with carbide point, exchangeable.
From €29.51
*
approx. 1-3 workdays
31 x in stock
Marking gauge, made of aluminium, flat pattern, black aluminium (HRC63) hartcoating, with mm-graduation, reading 0.05 mm, range 200 | 250 | 300 mm.
From €23.56
*
approx. 1-3 workdays
34 x in stock
Marking gauge made of aluminium, with protractor, black aluminium (HRC63), measuring range 200| 250 | 300 mm, with mm-graduation, reading 0.05 mm.
From €66.88
*
approx. 1-3 workdays
31 x in stock
Marking gauge, made of aluminium, with stop hook, flat pattern, black aluminium (HRC63), with mm-graduation, reading 0.05 mm.
From €27.01
*
approx. 1-3 workdays
Subsequent delivery
Digital steel marking gauge with ractangular plate 45 x 30 mm, HSS steel point hardened, with frac display, reading 0.01 mm or 0.0005“ or 1/128“
€124.47
*
approx. 10 weeks
Variant available
Digital marking gauge, made of black aluminium (HRC63) with back, range 300 500 | 800 mm, reading 0.01 mm, 0.0005" or 1/128".
From €91.27
*
approx. 10 weeks
61 x in stock
Precision spring gauge with brass scale, type 8295, for measuring wall and sheet thicknesses, made of special steel, reading 0/10 mm.
From €10.95
*
approx. 1-3 workdays
