Our top seller products
9 x in stock
2 x in stock
2 x in stock
5 x in stock
12 x in stock
No results were found for the filter!
Subsequent delivery
Workplace mat made of natural rubber, GEKKO, 150 x 90 cm, open bottom, ideally suited for dry work areas, e.g. packing tables or wrapping counters.
€74.38
*
Delivery time appox. 7 Workdays
Variant available
Ramped profile made of natural rubber for model HUSKY/STEINBOCK as flexible plug-in system ca. 100 x 8 cm, height ca. 17 mm.
€25.70
*
Delivery time appox. 7 Workdays
Subsequent delivery
Workplace mat made of natural rubber, HUSKY, ca. 92 x 92 cm, open bottom, expandable in any direction.
€73.42
*
Delivery time appox. 7 Workdays
Variant available
Hint!
Ergonomic workplace mat made of natural rubber LUCHS, available as base plate, double or centre piece can be used with
production lines.
€39.51
*
Delivery time appox. 7 Workdays
Variant available
Hint!
Ergonomic mat made of natural rubber OKTOPUS, available in size 60 x 90 or 90 x 120 cm, with closed structure for many industry workplaces.
From €35.46
*
Delivery time appox. 7 Workdays
Variant available
Anti-fatigue mat made of natural rubber LUCHS, available as base plate, double or centre piece can be used with production lines.
€92.82
*
Delivery time appox. 7 Workdays
Variant available
Ergonomic workplace mat made of natural rubber, PUMA, in standard version, Base plate, end piece and centre pieces can be expanded.
From €42.13
*
Delivery time appox. 7 Workdays
Variant available
Ergonomic mat made of nitrile rubber PUMA EXTRA, oil-resistant, base plate, end piece and centre pieces can be expanded.
From €65.69
*
Delivery time appox. 7 Workdays
Variant available
Workplace mat made of polyurethane, SALAMANDER with maximum grip, for low to medium load in dry areas.
From €432.57
*
Delivery time appox. 7 Workdays
Subsequent delivery
Workplace mat made of natural rubber, STEINBOCK, ca. 92 x 92 cm, closed design, expandable in any direction.
€80.92
*
Delivery time appox. 7 Workdays
Variant available
Fine grooved rubber mat, roll 10 x 1 m, WALK variants: height: 3 / 4 mm in natural rubber or 3 mm nitrile rubber 25 % NBR oil-resistant.
Content
10 meter
(€23.92 * / 1 meter)
From €239.19
*
Delivery time appox. 7 Workdays
Subsequent delivery
This multifunctional workshop equipment combines a hand truck, work table, creeper and a scaffold / workbench.
€176.60
*
approx. 10 weeks
8 x in stock
Safety guard for drilling machines PTR 02, hinged chucks - Protective devices with steel frame and impact-resistant, transparent protective shield.
From €303.45
*
approx. 1-3 workdays
8 x in stock
Safety guard for drilling machines PTR 20, hinged chucks - Guards with steel frame, impact resistant, transparent plastic shield.
€465.77
*
approx. 1-3 workdays
2 x in stock
Safety guard for drilling machines PTR 10, shield made from acrylic glass with frontal fixation, vertically foldable in positions 60°, 120° and 180°
From €307.85
*
approx. 1-3 workdays
2 x in stock
Safety guard for drilling machines PTR 11, shield made from acrylic glass with lateral fixation, vertically foldable in positions 60°, 120° and 180°
From €325.47
*
approx. 1-3 workdays
Variant available
Vertical opening safety guard with single arm equipped with gas spring, type PTO 14.
From €486.95
*
approx. 10 weeks
2 x in stock
Safety guard for PFR 02 milling machines, protective devices with steel frame, impact-resistant, transparent plastic protective shield can be folded down 180°.
From €967.95
*
approx. 1-3 workdays
2 x in stock
Safety hood for big independent chucks PTO 04, double foldable - Aluminium frame, transparent protective shield.
From €1,172.63
*
approx. 1-3 workdays
9 x in stock
Safety hood for lathe chucks PTO 01, foldable guards with steel frame, impact-resistant, transparent protective screen made of special plastic.
From €401.63
*
approx. 1-3 workdays
4 x in stock
Spare shield without steel frame for chuck protection made of acrylic glass, for lathe chuck Ø 80 - 400 mm.
From €38.08
*
approx. 1-3 workdays
1 x in stock
Spare shield with steel frame for chuck protection made of acrylic glass, for lathe chuck Ø 80 - 400 mm.
From €156.60
*
approx. 1-3 workdays
5 x in stock
Lathe chuck guard for lathes PTO 10, 180° turnable protective hood, transparent protective screen made of special plastic, with safety micro switch.
From €549.30
*
approx. 1-3 workdays
2 x in stock
Lathe chuck guard for lathes FS 20 with safety microswitch, sliding, hinged guards with safety disc and steel frame.
From €1,775.96
*
approx. 1-3 workdays
1 x in stock
Lathe chuck guard, bilateral slideable PTO 21, for chucks up to Ø 1200 mm, protection against chips, lubricant and coolant.
From €3,219.07
*
approx. 1-3 workdays
Variant available
Lathe chuck guard, bilateral slideable with additional back panel, type PTO 22, for chucks up to Ø 1200 mm.
From €3,575.83
*
approx. 10 weeks
12 x in stock
Safety guards for milling machines PFR 01, foldable chucks - Protective devices with steel frame, impact-resistant, transparent protective shield made of plastic.
From €902.97
*
approx. 1-3 workdays
2 x in stock
Safety hood for chucks, tiltable, PTO 12, with gas filled spring and safety micro-switch, protection against chips, lubricant and coolant.
From €1,452.51
*
approx. 1-3 workdays
Variant available
Protection shield with magnetic base PBM 20 for mobile use, impact-resistant, transparent protective device made of very high-quality, special plastic.
From €211.34
*
approx. 10 weeks
3 x in stock
Protection shield with magnetic base PBM 30, with articulated arm for mobile use, impact-resistant, transparent protective device of very high-quality plastic.
From €445.30
*
approx. 1-3 workdays
Variant available
Safety switch control for machines, with voltage warning light (400V) in metal box with short circuit and overload protection.
From €614.28
*
Delivery time appox. 21 Workdays
2 x in stock
Base column for safety guards or for work lights made of aluminium with T-nuts, adjustable fixing plate, internal conduit for lubricant coolant.
€234.67
*
approx. 1-3 workdays
3 x in stock
Circumferential protection for drilling machines PTR 30 with safety micro-switch, protection against chips, lubricant and coolant.
From €384.97
*
approx. 1-3 workdays
7 x in stock
Roll-up spindle cover for lathes typ PAT 01, made of heat-resistant textile tape is resistant to chips and cooling lubricants.
From €755.89
*
approx. 1-3 workdays
Variant available
Roll-up spindle cover for lathes in protective box PAT 02, made of heat-resistant textile tape is resistant to chips and cooling lubricants.
From €797.42
*
approx. 10 weeks
2 x in stock
Safety guard pivotable sideways PTO 17 with aluminium frame and safety microswitch, for lathes and face plates.
From €425.90
*
approx. 1-3 workdays
Variant available
Safety guard for grinding machines PMA 02, up/down adjustable guards with joint for quick adjustment and safety disc.
€82.23
*
approx. 10 weeks
1 x in stock
Safety guard for double grinding machines PMA 11, up/down adjustable guards with joint for quick adjustment and safety disc.
From €494.45
*
approx. 1-3 workdays
2 x in stock
Telescopic safety guard for drilling machines PTR 05 with safety micro-switch, protection against chips, lubricant and coolant.
€441.01
*
approx. 1-3 workdays
